TeamTalk Setup Guide

Please note that some images may take a moment to load.

First download TeamTalk 5 from the Play Store.

Once you open it, click on the 3 dots in the top right corner.

Then click Settings.

Now click General.

Now change your “Nickname”, “Gender” if needed, uncheck “Show Usernames” if you want to see Nicknames instead (Recommended), and uncheck “Show Public Servers” (We don’t use them and they clutter up the app)

Now click the back arrow and then click “Sound System”.

Now check “Mute speaker when pressing TX button”, “Enable speaker phone”, and if you are using a bluetooth headset, check “Use bluetooth headset microphone” too.

Hit the back button again and now click “Add Server” at the top.

Now click “Server Name” and enter the following, then click OK.

Now click on “Domain Name or IP-address” and enter the following, then click OK.

Now click on “TCP Port” and enter the following, then click OK.

Now click “UDP Port” and enter the following, then click OK.

Now click “Username” and enter the username you were given, then click OK. (The credentials shown will not work for login)

Now click “Password” and enter the password you were given, then click OK. (The credentials shown will not work for login)

Be sure to also change your “Nickname” and check or uncheck “Last Joined Channel” depending on if you want to join the last channel you were in when you last opened the app, or be placed in the root list so you can choose a new channel every time you connect to the server.

Now click “SAVE” at the top right, then click the radio icon on the left hand side of the newly added server.

Once you join the server, you can click on a channel, and click “JOIN” to join the channel selected.

If you have any questions, please email support@bintech-llc.com